 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION 1N4933G THRU 1N4937G FAST RECOVERY GLASS PASSIVATED RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere FEATURES * * * * * High reliability Low leakage Low forward voltage drop Glass passivated junction High switch capability DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.35 gram .034 (0.9) DIA. .028 (0.7) 1.0 (25.4) MIN. .205 (5.2) .166 (4.2) .107 (2.7) .080 (2.0) DIA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. o 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TA = 55 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO IFSM CJ TJ, TSTG 1N4933G 50 35 50 1N4934G 100 70 100 1N4935G 200 140 200 1.0 30 15 -65 to + 150 1N4936G 400 280 400 1N4937G 600 420 600 UNITS Volts Volts Volts Amps Amps pF 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 1.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 25 oC Maximum Full Load Reverse Current Full Cycle Average, .375" (9.5mm) lead length at TL = 55 oC Maximum Reverse Recovery Time (Note 1) NOTES : 1. Test Conditions: IF = 1.0A, VR = 30V 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts SYMBOL VF 1N4933G 1N4934G 1N4935G 1.2 5.0 IR 100 trr 200 uAmps nSec 2001-6 1N4936G 1N4937G UNITS Volts uAmps RATING AND CHARACTERISTIC CURVES ( 1N4933G THRU 1N4937G ) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 1.50 1.25 1.00 .75 .50 .25 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE, ( ) Single Phase Half Wave 60Hz Resistive or Inductive Load FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 40 30 20 10 8.3ms Single Half Sine-Wave (JEDED Method) 0 1 2 4 6 810 20 40 6080100 NUMBER OF CYCLES AT 60Hz CHARACTERISTICS 20 10 200 JUNCTION CAPACITANCE, (pF) 100 60 40 20 10 TJ = 25 INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3 - TYPICAL JUNCTION CAPACITANCE FIG. 4 - TYPICAL INSTANTANEOUS FORWARD 1.0 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 REVERSE VOLTAGE, ( V ) 100 .1 TJ = 25 Pulse Width = 300us 1% Duty Cycle .01 .6 .8 1.0 1.2 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 5 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 8 115Va 10K 60Hz 2W 7 6 C.P.CLARE HPG 1002 5 4 1 AMP SLO-BLO FUSE C1 1.0uF 300V 1 2 3.8uH/1.4 3 30 50W NON-INDUCTIVE UNIT UNDER TEST 1.0 Adc FROM CONSTANT VOLTAGE SUPPLY RIPPLE = 3mVrms MAX trr i(t) IFM 1.0 di/dt = 50A/uS 30 Vdc CONSTANT VOLTAGE SUPPLY R2 C1 1 1.0uF 10W 300V NONINDUCTIVE 0 MINIMIZE ALL LEAD LENGTHS A-TEKTRONIX 545A. K PLUG IN PRE AMP P6000 PROBE OR EQUIVALENT R2-TEN-1W 10 IN PARALLEL R1-ADJUSTED FOR 1.4 BETWEEN POINT 2 OF RELAY AND RECTIFIER 10 TA = 25 INDUCTIVE = 3.8uH 0 Zout 11/2 MAX DC to 2kHz % CARBON CORE IRM (REC) SET TIME BASE FOR 50/100 ns/cm FOR RECTIFIER RECTRON |
Price & Availability of 1N4934G
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |